How To Trap Rig a Big Hammer Swimbait
by Steve Greanias

This method builds on Larry Heron's rigging method.  With this method you can measure out the length of the leader ahead of time and it solves the problem of having to tie the leader line to the main hook after the leader is rigged through the bait.  Components needed are:

1) braided line (Spectra, Power-Pro, etc.).  It has been testing with up to 50 lb. test but 8 - 12 seems to be ideal.

2) Size 6 or 8 Octopus or Mosquito hook.

Start by tying your leader line to the trap hook and a loop on the opposite end.  The length of this rig should be approximately 2 1/4 to 2 3/8 inches from the bend of the trap hook to the tip of the loop.  You may need to experiment with lengths to see what works best for you.

Now tie a similar rig to your threading needle.

Connect the threading needle line to your leader like this...

Thread the needle through the swimbait starting at the tail.  Be careful not to get to close to the sides of the swimbait with the needle.  Once you have the needle through pull the line so the loop on your trap hook leader is near your main hook.

Now attach the loop to the shank of your main hook by wrapping the loop around itself putting the "new" loop around the shank of the main hook - much like attaching a hook to a dropper loop rig.

Pull the bait out straight, adjust the trap hook and you're ready to fish.

And for halibut drifting...

An alternate method is to just put the loop itself over the shank of the main hook.  There is one problem with this as there is a slight possibility that the trap hook can tear out of the swimbait on a large fish.  If that happens there would be nothing holding the trap leader onto the main hook.  This problem can be solved by tying a small piece of light monofilament through the trap leader loop and around the shank of the hook.
 

Big Hammer™, Hammer Swimbaits™, Square Tail™, Rectangular Tail™, Square Tail Design™, Rectangular Tail Design™ and the rectangular shaped swimbait tail design are all trademarks owned by Sunrize Tackle, Inc. (parent company of Big Hammer Lures). Use of these terms without written permission by Sunrize Tackle, Inc. is prohibited by law.

The photos, images, text and content of the Big Hammer™ website are copyrighted. These items and information are provided for your convenience and are only intended to be used in the positive promotion and sale of Big Hammer™ products. All other use is prohibited by law.

Big Hammer products are not intended to be used by children under 13 unless accompanied by an adult.

© Copyright Sunrize Tackle, Inc. - All Rights Reserved.